1. Product
Description HC-G-C01 is developed for bonding PMMA (Co-polymer Polystyrene) which is used for the construction of plugs according to “Lost Foam” principle. The adhesives is gap-filling to obtain a closed seal, minimal residue after incineration, fast drying at 60℃.
HC-G-C02 is a colorless transparent viscous liquid with a slight aromatic smell. It is used in bonding and assembly of foam parts.
2. Applied
Range It is successfully applied in EPS/STMMA/PMMA and other foam.
3. Physicochemical Indexes
4. Metho
Application by roller systems and cleaning can be performed with water. After gluing.it cannot be bonded immediately. It must be left open to air for 3-10 minutes until the solvent of the gellan evaporates and the basic surface of the gellan on the surface of the foam is dry. Then the adhesive can be pressed according to the requirements.
5. Storage method
Keep the containers closed and store preferably at room temperature, and it is sensitive to frost. The colloid is too thick due to improper preservation, it can be diluted with a small amount of methanol.
6. Package
20 kg. Drum.
7. Storage life
2 years
T